Solid lipid nanoparticles (SLNs), the potential novel vehicle for enhanced in vivo efficacy of hesperidin as an anti-inflammatory agent.

Hesperidin (C28H34O15), a flavanone glycoside abundantly present in citrus fruits, has proven therapeutic effects including anti-inflammatory activities. Herein, we report a novel formulation of HESP loaded solid lipid nanoparticles (SLNs) using hot homogenization and ultrasound to improve the poor solubility and bioavailability. In the present study, the formulation was developed and optimized by response surface method and then characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy (FT-IR), and dynamic light scattering (DLS). Encapsulation efficiency was determined and the anti-inflammatory effect was assessed through in vivo ear edema inflammation model. According to the electron microscopy results, the product has a spherical shape. The optimized parameters produced small size (179.8 ± 3.6 nm) HESP-SLNs with high encapsulation efficiency (93.0 ± 3.8 %). The outcomes exhibited that encapsulation in SLNs carriers improves the anti-inflammatory potential of HESP.

Formulation and stability of an extemporaneously compounded propafenone hydrochloride oral suspension for children with arrhythmia.

OBJECTIVES: In children, supraventricular tachycardia is the most common form of arrhythmia, and propafenone is an effective class Ic antiarrhythmic agent used in this population. No suitable paediatric-specific, dosing-flexible preparation is available in Taiwan. The objective of this study was to develop a formulation of propafenone oral suspension prepared from commercially available propafenone tablets and commercially available oral syrup vehicles for related patients. METHODS: An oral suspension of propafenone hydrochloride at a concentration of 10 mg/mL was prepared by mixing finely grounded propafenone hydrochloride tablets and a 1:1 mixture of Ora-Plus and Ora-Sweet. The beyond-use date was determined by analysing the samples stored at room temperature or 2-8℃ at time 0 and on days 7, 14, 21, 28, 35, 42, 56, and 90. Parameters to be inspected included appearance, pH measurement, high-performance liquid chromatography analysis, and microbial limit tests. RESULTS: On the basis of the physicochemical and microbial stability results, the 10 mg/mL oral suspension of propafenone hydrochloride was stable at 2-8℃ and room temperature for at least 90 days. The suspension did not exhibit significant changes in drug concentration or pH level at any time point. Moreover, no apparent changes or microbial contaminations were observed for at least 90 days. CONCLUSIONS: Propafenone hydrochloride in a 10 mg/mL oral suspension prepared by diluting fine powder with a 1:1 mixture of Ora-Plus and Ora-Sweet and stored in high-density polyethylene bottles and has a beyond-use date of 90 days when stored at 2-8℃ or room temperature. This finding enables us to improve the accuracy of dosage administration and reduce the risk of medication errors affecting the paediatric population.

Molecular Flexibility of Antibodies Preserved Even in the Dense Phase after Macroscopic Phase Separation.

Antibody therapies are typically based on high-concentration formulations that need to be administered subcutaneously. These conditions induce several challenges, inter alia a viscosity suitable for injection, sufficient solution stability, and preservation of molecular function. To obtain systematic insights into the molecular factors, we study the dynamics on the molecular level under strongly varying solution conditions. In particular, we use solutions of antibodies with poly(ethylene glycol), in which simple cooling from room temperature to freezing temperatures induces a transition from a well-dispersed solution into a phase-separated and macroscopically arrested system. Using quasi-elastic neutron scattering during in situ cooling ramps and in prethermalized measurements, we observe a strong decrease in antibody diffusion, while internal flexibility persists to a significant degree, thus ensuring the movement necessary for the preservation of molecular function. These results are relevant for a more dynamic understanding of antibodies in high-concentration formulations, which affects the formation of transient clusters governing the solution viscosity.

Adverse Reactions to Sunscreens.

Adverse reactions to sunscreens are uncommon in relation to their widespread use [Loden et al. Br J Dermatol. 2011;165(2):255-62; Jansen et al. J Am Acad Dermatol. 2013;69(6):867 e861-814; quiz 881-862] and can be related to both active and inactive ingredients in sunscreen products [DiNardo et al. J Cosmet Dermatol. 2018;17(1):15-19; Barrientos et al. Contact Dermatitis. 2019;81(2):151-52]. Pathogenetically, the main cutaneous adverse reaction patterns to sunscreens can be divided into allergic and irritant contact dermatitis, phototoxic and photoallergic contact dermatitis, contact urticaria, and, in solitary cases, anaphylactic reactions [Lautenschlager et al. Lancet. 2007;370(9586):528-37]. A summary is provided in Table 1. Nearly all adverse effects due to active sunscreen ingredients reported to date are related to the organic UV filters, which are sometimes also referred to as "chemical UV filters." This imbalance is attributable to the lipophilic character and small molecular size of the organic UV filters that allow skin penetration, which is the basic requirement to initiate the sensitization [Stiefel et al. Int J Cosmet Sci. 2015;37(1):2-30]. In contrast, cutaneous adverse reactions to inorganic UV filters, initially termed "physical UV filters" owing to their firstly known "physical" mechanism of action through reflection and scattering [Stiefel et al. Int J Cosmet Sci. 2015;37(1):2-30], are only reported by case reports. Neither zinc oxide nor titanium dioxide possesses relevant skin-irritating properties or sensitization potential [Lau-tenschlager et al. Lancet. 2007;370(9586):528-37]. Adverse reactions to UV filters currently approved in the European Union as listed in the Annex VI (updated November 7, 2019) are summarized in Table 2.

Challenges in Formulating Sunscreen Products.

Developing efficient sunscreen products with an acceptable sensory feel after application on skin, that meet current regulatory market and consumer requirements, is a major challenge, exacerbated by new restrictions limiting the use of certain ingredients previously considered crucial. This paper outlines a development strategy for -formulating sunscreens along a generic professional development pathway. Each galenic system will be different and must be customized. Development starts with benchmarking, followed by UVA/UVB filter platform selection and in silico calculation/optimization of photoprotection performance for the desired SPF, UVA-PF, and other requested endpoints. Next comes the selection of the emulsifier system and other key formulation ingredients, such as oil components, triplet quenchers, and antioxidants, with sensory, rheological, and film formation functions. Preliminary cost estimation is then performed to -complete the conceptual process before the start of the practical galenic development. The successful development of modern sunscreen products is based on -comprehensive expertise in chemistry, galenic methodology, regulation, and patenting, as well as specific -market and consumer requirements. The selection of the UV filters is the first key decision and constrains later choices. Other properties, such as water resistance and preservation or active ingredients, may need to be considered. The 4 basic requirements of efficacy, safety, registration, and patent freedom become checklist items to ensure that after development, a sunscreen product has a chance of success.

Hyperthermostability of prawn ferritin nanocage facilitates its application as a robust nanovehicle for nutraceuticals.

The favorable physicochemical properties are essential for the application of protein-based nanovehicles in the field of biomaterials. Herein, we found that the thermal stability of Marsupenaeus japonicus ferritin (MjFer) (Tm = 109.1 ± 0.4 °C) is markedly higher than human H-chain ferritin (HuHF) (Tm = 87.7 ± 0.3 °C), although they share a high structural similarity. Multiple results indicated that the promoted thermal stability of MjFer is mainly derived from the salt bridges located at the C3 interface. Consequently, MjFer exhibits strong protective effects on encapsulated curcumin upon exposure at high temperatures. In contrast, most of the curcumin loaded HuHF composites precipitated rapidly under the same conditions. These findings elucidated the molecular mechanism of the hyperthermostability of MjFer and illustrated that MjFer could act as a robust insulation nanocarrier for bioactive compounds against various thermal treatments.

Interactions of primaquine and chloroquine with PEGylated phosphatidylcholine liposomes.

This study aimed to analyze the interaction of primaquine (PQ), chloroquine (CQ), and liposomes to support the design of optimal liposomal delivery for hepatic stage malaria infectious disease. The liposomes were composed of hydrogenated soybean phosphatidylcholine, cholesterol, and distearoyl-sn-glycero-3-phosphoethanolamine-N-(methoxy[polyethyleneglycol]-2000), prepared by thin film method, then evaluated for physicochemical and spectrospic characteristics. The calcein release was further evaluated to determine the effect of drug co-loading on liposomal membrane integrity. The results showed that loading PQ and CQ into liposomes produced changes in the infrared spectra of the diester phosphate and carbonyl ester located in the polar part of the phospholipid, in addition to the alkyl group (CH2) in the nonpolar portion. Moreover, the thermogram revealed the loss of the endothermic peak of liposomes dually loaded with PQ and CQ at 186.6 °C, which is identical to that of the phospholipid. However, no crystallinity changes were detected through powder X-ray diffraction analysis. Moreover, PQ, with either single or dual loading, produced the higher calcein release profiles from the liposomes than that of CQ. The dual loading of PQ and CQ tends to interact with the polar head group of the phosphatidylcholine bilayer membrane resulted in an increase in water permeability of the liposomes.

Generation of Ophthalmic Nanosuspension of Prednisolone Acetate Using a Novel Technology.

PURPOSE: Prednisolone Acetate (PAC) is currently marketed as micronized ophthalmic suspension. The microsuspension has poor dose accuracy and efficacy due to aggregation, slow dissolution rate and limited corneal residence. The ophthalmic nanosuspension of PAC shall show enhanced solubility, dissolution rate and corneal adhesion due to small particle size and increased surface area. METHODS: In the current work, we prepared ophthalmic formulation of PAC using a novel, spray drying based technology. Firstly, PAC nanocrystalline solid dispersions (NCSD) were prepared using Mannitol (MAN) as the crystallization inducing excipient and two separate stabilizers, Polyvinyl Alcohol (PAC_MAN_PVA) and Vitamin E Tocopheryl Polyethylene Glycol Sulphosuccinate (PAC_MAN_TPGS). The NCSD was dispersed in an aqueous vehicle to obtain an ophthalmic nanosuspension. RESULTS: The composition, PAC_MAN_PVA (0.3:0.67:0.03%), was pursued due to absence of crystal growth on storage at 40°C/75%RH for 3 months. The resulting nanosuspension showed crystal size, osmolality and viscosity of 590 ± 165 nm, 297 ± 6 mOsm/L and 11 ± 8cP respectively. In 1%w/v SLS media, the nanosuspension showed rapid and complete dissolution of PAC in 120 s. Ex-vivo goat corneal permeation and adhesion study revealed that in comparison to microsuspension, a higher fraction (6.2 times) of nanosuspension adhered to the cornea. Safety studies performed using corneal histopathology and Hen Egg Test- Chorio Allantoic Membrane (HET-CAM) assay showed no physical change in cornea or capillary damage, respectively. CONCLUSIONS: The NCSD can be explored for generation of ophthalmically acceptable nanosuspensions of poorly soluble drugs.

Evaluation of ozonized calcium hydroxide as an effective intracanal medicament during root canal procedures: an in vitro observational study.

Achieving thorough disinfection is regarded as one of the pillars in endodontics. Although calcium hydroxide (CH) is one of the routinely used intracanal medicament in endodontics; alternative approaches are gaining popularity to mitigate endodontic pathology. However, CH has to be tested for its dissociation which is a rate-limiting attribute essential for its therapeutic action. The dissociation of CH into OH- and Ca2+ depends on the vehicle used to prepare the paste. This in-vitro study evaluated the use of ozonized olive oil in facilitating calcium ion release and change in pH when combined with CH. Fifty single rooted extracted human mandibular premolars were instrumented with NiTi rotary files (40/6). The teeth were divided into two groups (n = 25 per group) on the basis of vehicle: olive oil (CH + olive oil) and ozonized olive oil (CH + ozonized olive oil) groups. Both olive and ozonized olive oil vehicles allowed the diffusion of ions. However, pastes prepared with ozonized oil showed more ion diffusion, with marked calcium ion release after 15 days and alkalinity was maintained for complete period of 15 days, depicting better support for CH action. The change in calcium ion release and alkalinity were statistically significant in ozonized oil vehicle compared to olive oil vehicle. The present in-vitro study supports the use of ozonized olive oil as a vehicle to be used with CH as an intracanal medicament, considering its anti-microbial potential and sustainable release of calcium ions. The study was approved by the Institutional Ethical Committee of Manubhai Patel Dental College (approval No. MPDC_130/CONS-25/17) on June 4, 2018.

Bioavailability Enhancement and Food Effect Elimination of Abiraterone Acetate by Encapsulation in Surfactant-Enriched Oil Marbles.

Abiraterone acetate has limited bioavailability in the fasted state and exhibits a strong positive food effect. We present a novel formulation concept based on the so-called oil marbles (OMs) and show by in vitro and in vivo experiments that the food effect can be suppressed. OMs are spherical particles with a core-shell structure, formed by coating oil-based droplets that contain the dissolved drug by a layer of powder that prevents the cores from sticking and coalescence. OMs prepared in this work contained abiraterone acetate in the amorphous form and showed enhanced dissolution properties during in vitro experiments when compared with originally marketed formulation of abiraterone acetate (Zytiga®). Based on in vitro comparison of OMs containing different oil/surfactant combinations, the most promising formulation was chosen for in vivo studies. To ensure relevance, it was verified that the food effect previously reported for Zytiga® in humans was translated into the rat animal model. The bioavailability of abiraterone acetate formulated in OMs in the fasted state was then found to be enhanced by a factor of 2.7 in terms of AUC and by a factor of 4.0 in terms of Cmax. Crucially, the food effect reported in the literature for other abiraterone acetate formulations was successfully eliminated and OMs showed comparable extent of bioavailability in a fed-fasted study. Oil marbles therefore seem to be a promising formulation concept not only for abiraterone acetate but potentially also for other poorly soluble drugs that reveal a positive food effect.

Variations in preference for topical vehicles among demographic groups.

Patient satisfaction and outcomes can be optimized by identifying preferences for topical vehicles by age, gender, and ethnicity. Our study sought to identify variations in preferences for creams, lotions, and ointments among different age groups, genders, and ethnicities. Each demographic group revealed statistically significant differences in vehicle preference (P < .05).

Encapsulation of curcumin into layered double hydroxides improve their anticancer and antiparasitic activity.

OBJECTIVES: Curcumin (CUR) has well-known activity against cancer cells and parasites; however, its applications are limited since this is an unstable molecule, which may suffer degradation by light and temperature, also, the low water solubility reduce its bioavailability. Layered double hydroxides (LDH) are well-known materials owing to the excellent anion exchange capacity, good biocompatibility and low toxicity. METHODS: Layered double hydroxides nanoparticles prepared with zinc and magnesium cations were used as a vehicle for CUR in Caco-2, Giardia lamblia and Entamoeba histolytica cultures. The physicochemical properties of Mg-LDH-CUR and Zn-LDH-CUR were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FTIR) and X-ray powder diffraction (XRD). Additionally, the load efficiency, release profiles and photostability of CUR were quantified by high-performance liquid chromatography (HPLC) and UV-Vis spectrometry. Then, Mg-LDH-CUR and Zn-LDH-CUR were tested on Caco-2, G. lamblia and E. histolytica cultures. KEY FINDINGS: The experiments demonstrated that Zn-LDH-CUR protects better against photodegradation by UV light, while Mg-LDH-CUR showed increased toxicity against Caco-2 cell, G. lamblia and E. histolytica, in comparison with free CUR. CONCLUSIONS: Layered double hydroxides are good vehicles to improve stability, resistance to degradation of CUR, also they are useful to improve solubility, provide a controlled release and improve the cytotoxic activity. Additionally, it was shown that the composition of the M+2 cation of LDH affects its properties and structure and that this directly influences its biological activity. The findings are important to select the composition of the encapsulation vehicle for a specific activity.

ß-lactoglobulin micro- and nanostructures as bioactive compounds vehicle: In vitro studies.

ß-Lactoglobulin (ß-Lg) is known to be capable to bind hydrophilic and hydrophobic bioactive compounds. This research aimed to assess the in vitro performance of ß-Lg micro- (diameter ranging from 200 to 300 nm) and nano (diameter < 100 nm) structures associated to hydrophilic and hydrophobic model compounds on Caco-2 cells and under simulated gastrointestinal (GI) conditions. Riboflavin and quercetin were studied as hydrophilic and hydrophobic model compounds, respectively. Cytotoxicity experiment was conducted using in vitro cellular model based on human colon carcinoma Caco-2 cells. Moreover, the digestion process was simulated using the harmonized INFOGEST in vitro digestion model, where samples were taken at each phase of digestion process - oral, gastric and intestinal - and characterized in terms of particle size, polydispersity index (PDI), surface charge by dynamic light scattering (DLS); protein hydrolysis degree by 2,4,6-trinitrobenzene sulfonic acid (TNBSA) assay and native polyacrylamide gel electrophoresis; and bioactive compound concentration. Caco-2 cell viability was not affected up to 21 × 10-3 mg mL-1 of riboflavin and 16 × 10-3 mg mL-1 quercetin on ß-Lg micro- and nanostructures. In the oral phase, ß-Lg structures' particle size, PDI and surface charge values were not changed comparing to the initial ß-Lg structures (i.e., before being subjected to in vitro GI digestion). During gastric digestion, ß-Lg structures were resistant to proteolytic enzymes and to acid environment of the stomach - confirmed by TNBSA and native gel electrophoresis. In vitro digestion results indicated that ß-Lg micro- and nanostructures protected both hydrophilic and hydrophobic compounds from gastric conditions and deliver them to target site (i.e., intestinal phase). In addition, ß-Lg structures were capable to enhance riboflavin and quercetin bioaccessibility and bioavailability potential compared to bioactive compounds in their free form. This study indicated that ß-Lg micro- and nanostructures were capable to enhance hydrophilic and hydrophobic compounds bioavailability potential and they can be used as oral delivery systems.

UniORV, a New Multi-Unit Dosage Form, Improved Biopharmaceutical Properties of Tacrolimus in Rats and Humans.

PURPOSE: The aim of the present study was to develop a new multi-unit dosage formulation, Universal ORbicular Vehicle (UniORV), to improve the biopharmaceutical properties of tacrolimus (TAC). METHODS: TAC-loaded UniORV (UO/TAC) was produced by the dripping and gelling of a solution comprising TAC, gelatin, starch syrup, and triethyl citrate at 0.5 w/w% drug loading. Its microstructure was elucidated by polarized light microscopy and the Raman mapping technique. The pharmacokinetic profiles of TAC after the oral administration of UO/TAC were evaluated in rats and healthy humans. RESULTS: The dissolution behavior of UO/TAC was similar to that of commercial capsules, and the formation of nanoparticles was detected by TEM in dissolved media. In a stability study on UO/TAC, only 2.6 and 4.7% decreases in TAC concentrations were observed at 40± 2°C/75 ± 5% relative humidity for 4 months and at 50± 2°C for 2 months, respectively. A pharmacokinetic study on rats revealed a 30-fold higher AUC than that with crystalline TAC. A randomized double-blind crossover study on 8 healthy males showed that UniORV achieved a 1.4-fold increase in AUC and 34% decrease in inter-individual variation from the reference formulation. CONCLUSION: The new dosage form UniORV is a promising approach to improve the dissolution, amorphous stability, and biopharmaceutical properties of TAC, which is a poorly water-soluble drug.

Patients preferences for different corticosteroid vehicles are highly variable.

Introduction: Topical corticosteroids, available in an array of vehicles are used to control a variety of inflammatory skin diseases. Patients preferences for different vehicles may affect their willingness to use treatment. We assess corticosteroid vehicle preference and potential impact of topical characteristics on adherence and quality of life in patients with psoriasis.Methods: Subjects with psoriasis were recruited from Wake Forest University Dermatology Clinic. Subjects sampled desoximetasone 0.25% spray, betamethasone valerate 0.1% cream, triamcinolone acetonide 0.1% ointment, fluocinonide 0.05% gel, betamethasone valerate 0.1% lotion, clobetasol propionate 0.05% foam, and fluocinonide 0.05% solution in a predetermined randomized order. Subjects completed a Vehicle Preference Measure, Determinants of Adherence Measure, and a Determinants of Quality of Life Measure.Results: Patients preferences for the various products were highly variable. Regarding Determinants of Adherence, patients perception of absorption of the medication was ranked as 'quite important/extremely important' by 85% of total subjects. A majority of patients rated medication side effects as 'quite important/extremely important' when asked to consider topical characteristics effect on quality of life.Discussion: There was wide variation in patient preference for topical medication vehicles used for treating psoriasis. Several vehicle characteristics were considered important to adherence. Given the marked variation in vehicle preference, topical treatment should be individualized according to patients preferences.

Sonodynamic therapy in atherosclerosis by curcumin nanosuspensions: Preparation design, efficacy evaluation, and mechanisms analysis.

Previous studies have shown that curcumin (Cur) induced by ultrasound has protective effects on atherosclerosis even if low bioavailability of the Cur. The enhancement of bioavailability of the Cur further improved the curative effect of sonodynamic therapy (SDT) on atherosclerosis through nanotechnology. Nanosuspensions as a good drug delivery system had obvious advantages in increasing the solubility and improving the effectiveness of insoluble drugs. The aim of this study was to develop curcumin nanosuspensions (Cur-ns) which used polyvinylpyrrolidone (PVPK30) and sodium dodecyl sulfate (SDS) as stabilizers to improve poor water solubility and bioavailability of the Cur. And then the therapeutic effects of Cur-ns-SDT on atherosclerotic plaques and its possible mechanisms would be investigated and elucidated. Cur-ns with a small particle size has been successfully prepared and the data have confirmed that Cur-ns could be more easily engulfed into RAW264.7 cells than free Cur and accumulated more under the stimulation of the ultrasound. Reactive oxygen species (ROS) inside RAW264.7 cells after SDT led to the decrease of mitochondrial membrane potential (MMP) and the higher expression of cleaved caspase-9/3. The results of in vivo experiments showed that Cur-ns-SDT reduced the level of total cholesterol (TC) and low density lipoprotein (LDL) and promoted the transformation from M1 to M2 macrophages, relieved atherosclerosis syndrome. Therefore, Cur-ns-SDT was a potential treatment of anti-atherosclerosis by enhancing macrophages apoptosis through mitochondrial pathway and inhibiting the progression of plaques by interfering with macrophages polarization.

Assessment of critical material attributes of polyethylene oxide for formulation of prolonged-release tablets.

Physicochemical evaluation of polyethylene oxide (PEO) polymers with various molecular weights was performed at molecular (polymeric dispersion) and bulk level (powders, polymeric films, and tablets) with the aim of specifying polymer critical material attributes with the main contribution to drug release from prolonged-release tablets (PRTs). For this purpose, grades of PEO with low, medium, and high viscosity were used for formulating PRTs with a good soluble drug substance (dose solubility volume 15 ml). The results revealed a good correlation (r2=0.88) between in vivo data (pharmacokinetic parameters: Cmax and AUC) and the elastic property of PEO films determined with the nanoindentation method, demonstrating that film level can also be used for the in vivo prediction of drug dissolution. The study confirmed that polymer molecular weight and its viscosity are the most important critical material attributes affecting drug dissolution (in vitro) and in vivo bioavailability (e.g. Cmax and AUC). Our research revealed that the nanoindentation technique can distinguish well between various types of polymers, classifying PEO as the most ductile and polyvinyl alcohol as the most brittle. Finally, our study provides an approach for the determination of exact physical attributes of PEO as a critical material attribute from clinically relevant data, and it therefore fulfills the basic principles of product development by Quality by Design.

Delivery of mRNA vaccines with heterocyclic lipids increases anti-tumor efficacy by STING-mediated immune cell activation.

Therapeutic messenger RNA vaccines enable delivery of whole antigens, which can be advantageous over peptide vaccines. However, optimal efficacy requires both intracellular delivery, to allow antigen translation, and appropriate immune activation. Here, we developed a combinatorial library of ionizable lipid-like materials to identify mRNA delivery vehicles that facilitate mRNA delivery in vivo and provide potent and specific immune activation. Using a three-dimensional multi-component reaction system, we synthesized and evaluated the vaccine potential of over 1,000 lipid formulations. The top candidate formulations induced a robust immune response, and were able to inhibit tumor growth and prolong survival in melanoma and human papillomavirus E7 in vivo tumor models. The top-performing lipids share a common structure: an unsaturated lipid tail, a dihydroimidazole linker and cyclic amine head groups. These formulations induce antigen-presenting cell maturation via the intracellular stimulator of interferon genes (STING) pathway, rather than through Toll-like receptors, and result in limited systemic cytokine expression and enhanced anti-tumor efficacy.

Native starch as in situ binder for continuous twin screw wet granulation.

The use of native starch as in situ binder in a continuous twin screw wet granulation process was studied. Gelatinization of pea starch occurred in the barrel of the granulator using a poorly soluble excipient (anhydrous dicalcium phosphate), but the degree of gelatinization depended on the liquid-to-solid ratio, the granule heating and the screw configuration. Furthermore, the degree of starch gelatinization was correlated with the granule quality: higher binder efficiency was observed in runs where starch was more gelatinized. SEM and PLOM images showed experimental runs which resulted in completely gelatinized starch. Other starch types (maize, potato and wheat starch) could also be gelatinized when processed above a critical barrel temperature for gelatinization. This barrel temperature was different for all starches. In situ starch gelatinization was also investigated in combination with a highly soluble excipient (mannitol). The lower granule friability observed using pure mannitol compared to a mannitol/starch mixture indicated that starch did not contribute to the binding, hence starch did not gelatinize during processing. The study showed that native starch can be considered as a promising in situ binder for continuous twin screw wet granulation of a poorly soluble formulation.

Intracellular RNA delivery by lipid nanoparticles: Diffusion, degradation, and release.

Various RNAs (siRNAs, miRNAs, or mRNAs) can be delivered into cells by lipid nanoparticles (LNPs) of 50-150 nm in diameter. The subsequent RNA release from LNPs may occur via various scenarios. Herein, two related kinetic models are proposed. The first model takes into account that LNPs are often porous so that RNA molecules diffuse in and detach from nanopores. The analysis is focused on RNA diffusion from a pore. The analytical expression obtained for the RNA escape rate constant is used to identify the difference in the release of siRNAs, miRNAs, and mRNAs. The key message here is that the mRNA diffusion from pores appears to be too slow, and accordingly the mRNA release seems to occur primarily via degradation of LNPs. The second coarse-grained model describes the diffusion-mediated release of RNA from a LNP in the situation when this process is accompanied by the LNP degradation at the lipid-solution interface. The corresponding kinetics are shown in detail at different relative rates of the RNA diffusion and LNP degradation. Potentially, this can help to interpret drug plasma levels after various dosing regimens.